Malbec Pad OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 58% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2, Mod Env.

LFO 2 mod-matrix 2 modulation amount for pulse width of square oscillator is -31.

Mod Env modulates LFO 2 (amount: -31), that in turn modulates pulse width of square oscillator.

Oscillator 2 timbre

Volume level for oscillator 2 is set to 155 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 8 modulation amount for volume level for oscillator 2 is 64.

Tone for oscillator 2 is set to 65 and is modulated by LFO 2, Mod Env.

LFO 2 mod-matrix 1 modulation amount for tone for oscillator 2 is 35.

Mod Env modulates LFO 2 (amount: 35), that in turn modulates tone for oscillator 2.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 10.

Noise timbre

Noise level is manually set to 7.

Oscillator 1 FM timbre

experimental

Oscillator 1 pitch is modulated by Mod Wheel, LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 3.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 113.23Hz (96).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 477.06Hz (96) and is modulated by Mod Wheel, Note Vel, LFO 1, VCF Env.

LFO 1 direct modulation amount for low-pass filter cut-off frequency is 33.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 86.

Low-pass filter envelope amount is modulated by Note Vel.

Note Vel direct modulation amount for low-pass filter envelope amount is 167.

Filter resonance is statically set to 12% (30).

Oscillator drift & unison detuning timbre

Unison detune level is off.

Oscillators drift level is manually set to 26. Drift rate is 4

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by Mod Wheel, LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 3.

Tuning pitch

Patch Malbec Pad OS is transposed by 12 semitones.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 17. Effect 4 level is manually set to 20.

Gated Reverb fx

not yet complete

Ambient Reverb fx

not yet complete


Mod Wheel modulator

Controls OSC 1 Mod Wheel > Pitch Mod Depth, LFO 1 Rate, OSC 1 Pitch, VCF Cut-off Frequency, VCA Pan, Gated Reverb Param 0, FX 3 Level, OSC 2 Level.

functiontypedestinationamount
pitch menu OSC 1 Mod Wheel > Pitch Mod Depth 5
matrix LFO 1 Rate 55
pitch fader-indirect OSC 1 Pitch 3
timbre fader-indirect VCF Cut-off Frequency 33
volume indirect VCA Pan 10
fx matrix Gated Reverb Param 0 43
fx matrix FX 3 Level 32
timbre matrix OSC 2 Level 64

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 86
menu VCF Envelope Velocity Sensitivity 167
menu VCA Envelope Velocity Sensitivity 74

LFO 1 modulator

Controls OSC 1 Pitch, VCF Cut-off Frequency, VCA Pan.

functiontypedestinationamount
pitch fader OSC 1 Pitch 3
timbre fader VCF Cut-off Frequency 33
volume matrix VCA Pan 10
namevalue
LFO 1 Rate 0.23Hz (60)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 7

LFO 2 modulator

Controls OSC 2 Tone Modulation Depth, OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre matrix OSC 2 Tone Modulation Depth 35
timbre matrix OSC 1 Pulse Width Modulation Depth -31
namevalue
LFO 2 Rate 1.11Hz (114)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 1.35s (143)
VCA Envelope Decay Time 13.49s (203)
VCA Envelope Sustain Level 50% (129)
VCA Envelope Release Time 3.17s (174)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 82
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 86
namevalue
VCF Envelope Attack Time 11s (196)
VCF Envelope Decay Time 9.22s (191)
VCF Envelope Sustain Level 57% (146)
VCF Envelope Release Time 1.71s (167)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 55
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0

Mod Env modulator

Controls LFO 2 Rate, OSC 2 Tone Modulation Depth, OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
matrix LFO 2 Rate 22
timbre indirect OSC 2 Tone Modulation Depth 35
timbre indirect OSC 1 Pulse Width Modulation Depth -31
namevalue
Mod Envelope Attack Time 0.87s (110)
Mod Envelope Decay Time 7.8s (187)
Mod Envelope Sustain Level 49% (126)
Mod Envelope Release Time 1.75s (170)
Mod Envelope Trigger Mode Key (0)
Mod Envelope Attack Curve 113
Mod Envelope Decay Curve 195
Mod Envelope Sustain Curve 128
Mod Envelope Attack Curve 159